LECROY WAVEPRO 950 CALIBRATION and LECROY WAVEPRO 950 REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the LECROY WAVEPRO 950 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Oscilloscope?
Shop for Comparable Products on our  used Oscilloscope page

 
   LECROY WAVEPRO 950   Description / Specification:    
LECROY WAVEPRO 950 4 Ch 1 GHz WavePro Digital Oscilloscope

The Lecroy WavePro 950 4 channel 1 GHz oscilloscope uses high-speed 16 GS/s A-to-D converters and 64 Mpts deep memory. Specifications. Channels: 4. Bandwidth (-3dB): 1 GHz @ 50 ohms and at probe tip with PP005. Bandwidth Limiter: 20 MHz or 200 MHz. Input Impedance: 50 ohms ±1.5%; 10 M-ohm, 11 pF typical (using PP005 probe). Input Coupling: AC, DC, GND (1 M-ohm), DC, GND (50 ohms). Max Input: 5 V rms (50 ohms), 100 V max (peak AC <= 5 kHz + DC)(1 M-ohm). Vertical Resolution: 8 bits; up to 11 bits with enhanced resolution (ERES). Sensitivity: 1 mV to 1 V/div fully variable (50 ohms), 1 mV to 2 V/div fully variable (1 M-ohm). DC Accuracy: ±2.0% of full scale +1.5% offset value @ gain > 10 mV. Offset Accuracy: ±(1.5% + 0.5% of full scale + 1 mV). Isolation – channel to channel: > 250:1 at same V/div settings. Timebases: Main and up to four zoom traces simultaneously. Time/Div Range: 200 ps/div to 1000 s/div. Clock Accuracy: <= 10 ppm. Interpolator Resolution: 5 ps. Max Sample Rate: 16 GS/s (1 Ch). Trigger Modes: NORMAL, AUTO, SINGLE and STOP. Maximum Trigger Frequency: Triggers up to maximum bandwidth (HF), or 1 GHz (AC, DC).



 

Standard Calibration $220.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the LECROY WAVEPRO 950. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Clipping
Clipping is the limiting of a signal so that it never exceeds some threshold.

Line Regulation
Line regulation is the capability to maintain a constant output voltage level on the output channel of a power supply despite changes to the input voltage level.

Peak Envelope Power
Peak envelope power is the maximum value of the envelope power. Envelope power is measured by making the averaging time much less than 1/fm where fm is the maximum frequency component of the modulation waveform. The averaging time is therefore limited on both ends: (1) it must be small compared to the period of the highest modulation frequency, and (2) it must be large enough to be many RF cycles long.

RMS
RMS or root mean square is a statistical measure of the magnitude of a varying quantity

Please contact us for your LECROY WAVEPRO 950 CALIBRATION and/or LECROY WAVEPRO 950 4 Ch 1 GHz WavePro Digital Oscilloscope REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: